|
Post by 73NOVASS on May 18, 2011 23:19:46 GMT -6
Had a great day on the dyno today at speed inc! Numbers were higher than i expected Randy/yatesefi really helped me out again with getting this new combo put together in a short amount of time. Everything always is above my expectations that comes out of there and Randy always goes above and beyond what is hoped for. So thanks Randy, jimi,and russ Last Years Info and numbers: 8lbs of boost = 515rwhpSTOCK LS1 70 Masterpower turbo ls1 intake 93 Octane manual boost controller Turbo Cam Stock 12bolt 3:42 Gear Stock T56 Trans This years info and numbers: 673 rwhp and 684tq!!!STOOOOOCK LS1 78 TurboneticsLS6 INTAKE110 OctaneAEM TRU BOOST CONTROLLERSame Turbo cam as last year Wilwoods all the way aroundBuilt Rear end-Mark williams spool/axels 3:73 Gear RPMTRANSMISSION.COM BUILT LEVEL VI MAGNUM T56Pics of the day and a couple jank videos: first dyno run, started around 8 lbs One of the last dyno runs hit 14 lbs 673hp684tq LIFE IS GOOD
|
|
|
Post by Thewhitenotch on May 19, 2011 5:53:30 GMT -6
Killer numbers. Also thanks for taking my computer up there so they could base tune my camaro.
|
|
|
Post by nomrlz on May 19, 2011 6:12:47 GMT -6
nice #'s
|
|
|
Post by MeanYellowZ on May 19, 2011 7:03:54 GMT -6
Scott, we are glad to help and be a part of your project! Congrats to you and the Nova BTW, Ceramic ball bearing for the win!
|
|
|
Post by LT1 ANDY on May 19, 2011 8:00:26 GMT -6
Nephew said "he's got that covered on muscle"
Andy
|
|
|
Post by LT1 ANDY on May 19, 2011 8:03:41 GMT -6
Oh yeah but congrats on the numbers! Big power, for sure! Those ls1 ringlands have to be freaking out right now!
And great job to YatesEFI, you have yet to let a customer down! I'm sure fitting Scott Wolfe in was no easy task as busy as you are but that truly shows your commitment to your customers! Kudos!
Andy
|
|
|
Post by 65svtfastback on May 19, 2011 9:27:43 GMT -6
Just out of curiosity what did it make with the new turbo at 8lbs?? Just curious to get an apples to apples comparison to the old turbo numbers. AWESOME new numbers!!! Time for a new botton end and some heads
|
|
|
Post by 73NOVASS on May 19, 2011 9:53:03 GMT -6
I believe it was in the low 540's on 8 lbs and 93 with the 78 ceramic ball bearing turbonetics. Compared to 515 on 8lbs And 93 with the masterpower 70.... I'll double check that statement when I get home tonight
|
|
mightymouse
Potty Trained
Founding Member
Nathan Moonen
Posts: 293
|
Post by mightymouse on May 19, 2011 11:52:38 GMT -6
Forgive me for not knowing all the GM monikers for their assorted V8 engines. What cubic inches we talkin' here?
|
|
|
Post by Sukkoi19 on May 19, 2011 13:04:31 GMT -6
346 c.i.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2011 15:14:41 GMT -6
I just want to thank you for posting a picture of your dog
|
|
|
Post by patriotformula on May 19, 2011 17:32:06 GMT -6
^too much hate here
|
|
|
Post by LT1 ANDY on May 19, 2011 18:09:29 GMT -6
Easy there hurricane Doug (has ceramic balls also)
(edit) I still can't get over that torque, I would'nt have been able to stop! (prob why I have nothing that runs, lol!)!. It was still making more torque than than HP. Is that an RV or a power tour car! Impressive. Almost chipped dmax torque. Andy
|
|
dueces
Wrecked Daddy's Car
Posts: 565
|
Post by dueces on May 19, 2011 20:18:01 GMT -6
Nice Numbers!! Cant wait to see what she runs
John
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2011 22:11:52 GMT -6
Easy there hurricane Doug (has ceramic balls also) (edit) I still can't get over that torque, I would'nt have been able to stop! (prob why I have nothing that runs, lol!)!. It was still making more torque than than HP. Is that an RV or a power tour car! Impressive. Almost chipped dmax torque. Andy well Andy, to bad it doesn't look as good as a dmax...
|
|
|
Post by LT1 ANDY on May 19, 2011 22:19:51 GMT -6
DYNO SHEETS OR IT DID'NT HAPPEN! (I should make sure I say, j/k so you don't unfriend me from this thread ) Andy
|
|
|
Post by 73NOVASS on May 22, 2011 18:56:20 GMT -6
There's a finished picture cleaned up... Dyno sheet to come if I learn how to blow it up so u can read it...it came as a small pic
|
|
|
Post by MeanYellowZ on May 22, 2011 19:19:35 GMT -6
|
|
SonicS10
Potty Trained
Giggity
Posts: 173
|
Post by SonicS10 on May 22, 2011 19:27:12 GMT -6
Sick nova, Randy did a excellent job
|
|
|
Post by MeanYellowZ on May 22, 2011 19:40:17 GMT -6
Took a lot of effort from a lot of different sources to get that car where it is today - far from just me.
|
|
|
Post by patriotformula on May 22, 2011 20:59:26 GMT -6
Congrats guys, thats some serious horsepower!
|
|