Post by 65svtfastback on Oct 10, 2012 9:37:02 GMT -6
I am selling my coupe project. Age old story of kids getting older and realizing I will not have the time to campaign the car like I wanted to.
Here is the build link:
qcaautoforums.proboards.com/index.cgi?action=display&board=builds&thread=11545&page=1#101654
The car is pretty much just like the pictures towards the end of the thread. The cage is 85% or so done. This would be an awesome street/grudge car. I kept ergonomics/streetablily very much in mind while building the cage.
I have quite a few parts for this as well and would sell it as a bare shell or a complete package. I have a team-z fornt suspension kit, team-z 9" housing, team-z caster/camber plates, afco double adjustable rear shocks, koni single adjustable front struts, kirkey seats, fuel cell, JW powerglide case, JW powerglide roller tail housing, taylor battery box, and lots of other misc parts.
I am looking to get $1500.00 for the shell alone as it sits now. This will come with the shell as pictured, a title, a roof, and a front clip. Basically it needs the funny car portion finished up, front and rear crossmembers welded in, the under the seat bar, and a few misc. welds finsihed to be a full 25.5 chassis. The funny car cage and the rear cross member is all bent up already.
If you want the cage finished by me we can work something out, but I do not have the time righ now to detail out the chassis (mount seats, engine, etc.)
If you are interested in the parts as well we can talk about a package deal. You can not hardly buy the chrome moly tubing in the cage for what I am asking for the car. I also have lots of modular ford parts I am going to sell if you wanted to go that route engine wise.
Here is the build link:
qcaautoforums.proboards.com/index.cgi?action=display&board=builds&thread=11545&page=1#101654
The car is pretty much just like the pictures towards the end of the thread. The cage is 85% or so done. This would be an awesome street/grudge car. I kept ergonomics/streetablily very much in mind while building the cage.
I have quite a few parts for this as well and would sell it as a bare shell or a complete package. I have a team-z fornt suspension kit, team-z 9" housing, team-z caster/camber plates, afco double adjustable rear shocks, koni single adjustable front struts, kirkey seats, fuel cell, JW powerglide case, JW powerglide roller tail housing, taylor battery box, and lots of other misc parts.
I am looking to get $1500.00 for the shell alone as it sits now. This will come with the shell as pictured, a title, a roof, and a front clip. Basically it needs the funny car portion finished up, front and rear crossmembers welded in, the under the seat bar, and a few misc. welds finsihed to be a full 25.5 chassis. The funny car cage and the rear cross member is all bent up already.
If you want the cage finished by me we can work something out, but I do not have the time righ now to detail out the chassis (mount seats, engine, etc.)
If you are interested in the parts as well we can talk about a package deal. You can not hardly buy the chrome moly tubing in the cage for what I am asking for the car. I also have lots of modular ford parts I am going to sell if you wanted to go that route engine wise.