Lucky
Potty Trained
Posts: 428
|
Post by Lucky on Jan 26, 2012 16:38:59 GMT -6
Anybody have any experience doing vinyl wrap? I'll going to wrap the hood on my snowmobile and am looking for any help or advice!
|
|
|
|
Post by patriotformula on Jan 26, 2012 20:53:46 GMT -6
I heard Edwards Creative does a great job... Unless you mean you're doing it yourself?
|
|
Lucky
Potty Trained
Posts: 428
|
Post by Lucky on Jan 26, 2012 23:21:54 GMT -6
Looking to try and do it myself first!
|
|
|
|
Post by jjjustin17 on Jan 27, 2012 17:19:18 GMT -6
my buddy does it.. ive watched him a few times. he said not to use the plastic scraper as it scratched the vinyal. use plenty of soap and a sgwedge
|
|
Burntblkz
Potty Trained
Founding Member
Posts: 192
|
Post by Burntblkz on Jan 28, 2012 14:45:29 GMT -6
I've wrapped a quad before.. The plastic thing that comes with is to rigid and caused some problems, I used a small rubber spatula thing, worked better. A squirt bottle full of soapy water and a heat gun on low to help stretch a little bit but careful not to get to close. No need to be generous with the water better to have to much then not enough, I sprayed it on top also seemed to help it from wanting to pull on the wrap. It's really not hard It just takes some patients to do.
|
|
segars62
Can't post in the classifieds yet!
Posts: 1 
|
Post by segars62 on May 31, 2017 2:49:50 GMT -6
I also wrapped my car with vinyl wraps but unfortunately it didn’t come out that much clean so after that I used the professional vehicle wraps services. They did wonderful job and the best thing is that they printed custom graphics too on the wraps. |
|
