383z28
Potty Trained
Posts: 102
|
Post by 383z28 on Apr 3, 2006 20:38:06 GMT -6
I'm about to glue the bucket back together for my Walbro swap in my 94 Z and I want to know if I should remove the little black rubber check valve that is in the inlet of the bucket. If I leave it in there and glue the bucket back together, it's in there for good. So it would be nice to know if I can remove it or if it serves a real purpose? Anybody know?? Thanks in advance.
|
|
383z28
Potty Trained
Posts: 102
|
Post by 383z28 on Apr 4, 2006 14:31:12 GMT -6
NM, figured it out....................
|
|
|
|
Post by blown383stroker on Apr 16, 2006 0:33:38 GMT -6
hey is u'r car white?
|
|
|
|
Post by kev01ws6 on Apr 16, 2006 8:09:16 GMT -6
if the 94 is the same as the 93 setup in the tank , i ditched the whole bucket. i used large bandclamps and a peice of rubber to attatch the walbro to the long metal arm. this worked great for me. kev
|
|
383z28
Potty Trained
Posts: 102
|
Post by 383z28 on Apr 18, 2006 6:11:11 GMT -6
Yep, white with a cowl hood. What I ended up doing with the pump was reuse the bucket and for the hose I ended up cutting a piece of 3/8 line to length and warming up the ends and pushing them onto the pump outlet and the snap fitting. I then clamped the ends and it worked out just great. |
|
