First '03/04 Cobra Over 1000hp

[mosconiac]

Bross03cobra's old car (since sold to some guy by the name of Rex) claims to have gone over 1000rwhp. Pull was stopped early due to running out of injector.

Here's the sheet.
www.modularfords.com/forums/attachments/turbo-terminators/24875-first-turbohorsepower-car-to-reach-the-1000rwhp-mark-1000-rwhp-sml.jpg?d=1148706298


Turbo Horespower (THP) Kit with Twin 67's (.63 ar) on built ‘03 Cobra Iron Block (0.020 Over)

Manley 2618 Platinum Series Pistons 8.5:1 18cc
Manley H-Beam rods
ARP 2000 rod bolts
MMR/Felpro extreme duty head gasket set
ARP headstud kit
ARP mainstud kit
FR500 camshaft kit
MMR Racing/street oil pump w/cryo gearset
MMR Street/strip oil pan
Speed Pro Race rod bearings
Speed Pro Main bearing set
Speed Pro Moly file fit rings
Felpro Rear main seal and timing set
New OEM side bolts & timing chain tensioners
Polished Cobra crank
TCI’s Rattler 2000 Harmonic balancer

Here are 6 pics (the direct links are provided in case the forum doesn't display them properly).
img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra1.jpg

img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra2.jpg

img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra3.jpg

img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra4.jpg

img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra5.jpg

img.photobucket.com/albums/v407/mosconiac/Turbos/bross03cobra6.jpg

[mosconiac]

Update:

They ran out of injector before, so with bigger injectors and turbos...

"We just finished dynoing the White 03 Cobra of Rex's (Bill Ross's old Cobra Shinoda) and with 75# injectors and 61MM turbo upgrades it made 1,172 RWHP!

Many thanks go out to Nate Phillips- Rocky Mtn. Racing - tuning, Chris Groves - Dyno Edge, Rex Glenn - Cobra Shinoda Owner, Johnny - THP lead technician and many others. I will post up the graph ASAP. That's more than 4 HP per Cu Inch.
Thanks! Jim - TurboHorsePower.com

2V = 912 RWHP 05-06 Mustangs
3V = 753 RWHP 96-04 Mustangs
4V = 1,172 RWHP 96-04 Cobras"

[ygetv8]

Wow! I think you have your 2V and 3V listings mixed up, however.

[mosconiac]

It's a cut & paste from their svtsnake.com post so I can't tell you anything about those cars...yet. I'm going to see if there is anythign on their website about them.

[mosconiac]

Here's "3V=753rwhp" info....
www.modulardepot.com/forums/showthread.php?p=714174

Here's the 3V kit...
www.turbohorsepower.com/200506mustang.html

www.turbohorsepower.com/200506mustang2.html


I couldn't find any dyno sheets for the 2V kit, but here it is...
www.turbohorsepower.com/2v1.jpg

www.turbohorsepower.com/2vlarge2.html


Here's a Fox kit...
www.turbohorsepower.com/ifour.html


EDIT: I had to paste in the links again because this forum is sporatic on showing pics.

[honkey84]

That sounds about right for the three valve motor. But really depends on what other stuff he had on the car. Most of those guys are pushing about 500rwhp with prochargers and KB's. So they really wake up with power adders. Also that is not the first 1000 rwhp 03-04 cobra.