|
Post by blktransam on Jun 10, 2006 19:52:52 GMT -6
hey guys gonna be tearing my buddies 4.6 apart I havent looked nor asked him if its a 2v or 4v but whats the best heads,cams,intake,tb....for this engine were doing it all at once and wanting the best cheapest combo
klemme
|
|
|
Post by BM1 on Jun 10, 2006 20:16:04 GMT -6
FR500
|
|
|
Post by blktransam on Jun 10, 2006 21:04:20 GMT -6
huh....
|
|
|
Post by Sukkoi19 on Jun 10, 2006 21:24:06 GMT -6
Klemme those cars are alot different than the Windsor, make sure you really know what your doing before you try it. That being said, call these guys: www.ModularMustangperformance.com
|
|
|
Post by BM1 on Jun 11, 2006 1:15:07 GMT -6
You should consider Livernois Motorsports. They're located in Michigan so you could take a weekend to drive up there and have work done.
|
|
|
Post by blktransam on Jun 11, 2006 8:59:28 GMT -6
they that bad?.... i mean a damn chiltons wouldnt work on these engine? beings it would be my first one
|
|
|
Post by 94venomv8 on Jun 11, 2006 15:03:34 GMT -6
I agree with the FR500 comment those cars are bad with that kid, also for intake the p-51 is suipposed to be good but very pricey also patriot heads get good power also but pricey...;
|
|
|
Post by blktransam on Jun 11, 2006 17:53:41 GMT -6
okay i dont know what fr500 is and im looking for a good combo guys....not if this is good or that is good we need a complete combo set-up so we can get the ball rolling on this
klemme
|
|
|
Post by mexis97gt on Aug 3, 2006 0:32:26 GMT -6
back from the dead
what year is the car, it kinda makes a difference if it s 96-98 just do the pi swap, alot cheaper then aftermarket. or if again its thte 96-98 engine you could just have the heads ported they can flow just as well a pi ported heads and can keep the lower compression. if going after market ide go patriot low prices compared to others and you can get them assemble as a package heads , cam, springs. and do your self a favor and just use the pi intake , so much cheaper and your really not gonna see to much of a difference on a NA car. the p51 intake is kickass but f-ing expensive. TB and Upper Plenum the best is Accufab combo but its like 400+ forthe combo, when you could get a Granatelli plenum and mac or bbk tb for like 275-300 range even cheaperif you buy used stuff.
|
|