Post by MystiChrome04 on Aug 24, 2006 22:06:47 GMT -6
Now this wire is turned but yours won't be. It will run straight to the side closest to the firewall. It's the thickest, all red wire of the bunch. you'll want to pull back some loom to get enough wire on each side to solder to.
If you look closely here where i've pointed to (down towards the left) it's the other side of the thick red wire i'm talking about. You'll want to solder the red wire coming from the BAS to this side of the wire (the side that goes into that harness) the other side of the wire that is in the top picture you solder the orange fused wire coming out of the BAS to.
Here you can see the red and orange wire coming out of BAS and the ground.
Hope this helps. Other than that it's pretty straight foward. You only need to run the ground and those 2 wires. It gets power from the wire you splice into.
If you look closely here where i've pointed to (down towards the left) it's the other side of the thick red wire i'm talking about. You'll want to solder the red wire coming from the BAS to this side of the wire (the side that goes into that harness) the other side of the wire that is in the top picture you solder the orange fused wire coming out of the BAS to.
Here you can see the red and orange wire coming out of BAS and the ground.
Hope this helps. Other than that it's pretty straight foward. You only need to run the ground and those 2 wires. It gets power from the wire you splice into.
